Sony Ericsson / Sony : Software, Firmware and Drivers : DB2010 cid49 with Far + SEFP, Tested with k750
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> DB2010 cid49 with Far + SEFP, Tested with k750
Bookmark topic
On 2007-03-21 21:52:23, in4matics wrote:
Hello,
I follow the instructions but when I arrived this step:
-------------------------
After editing all the Stuff you want you must shutdown the CSFSLoader , just keep pressing .. until is asks you if you want to quit and press Yes !
Close FAR and unplug phone!!
Open FAR again and make same procedure to connect your phone !
Now Click On FLASH .
-------------------------
The FarManager said: "script flash_mode execution error"!
Please help me.. what's the problem ???
--
Posted: 2007-03-25 08:01:34
Edit :
Quote
On 2007-03-21 21:52:23, in4matics wrote:
Hello,
I follow the instructions but when I arrived this step:
-------------------------
After editing all the Stuff you want you must shutdown the CSFSLoader , just keep pressing .. until is asks you if you want to quit and press Yes !
Close FAR and unplug phone!!
Open FAR again and make same procedure to connect your phone !
Now Click On FLASH .
-------------------------
The FarManager said: "script flash_mode execution error"!
Please help me.. what's the problem ???
I uninstall FarManager and restart my PC. The FarManager can detect my phone now..but when i click FLASH i got these message:
**ALL LOADERS TAKEN FROM SETOOL2**
Sending QH_ldr:db2010_CID00_R2F_id.ldr: header...sent 896 bytes
Sending QH_ldr:db2010_CID00_R2F_id.ldr: prologue...sent 5896 bytes
It completes 100% then i got error message
Script flash_mode execution error!
Error Code:0
What does it means?Please help me
--
Posted: 2007-03-25 08:10:24
Edit :
Quote
i just reupdate my hset with SEUS tools and it worked but i still cant figure out wat's wrong before..i wanted to update my camera driver..
--
Posted: 2007-03-25 08:46:38
Edit :
Quote
i,ve solved my problem spending 4 hrs using SEUS for my dead k750! i got new fw R1dbOO1 and i red about this new fw complaining that works bad on media player, but on mine it was better than my prev fw R1CA021..but i still want to change my cam driver but since FAR does not work with CID 49 what should i do?
--
Posted: 2007-03-25 18:41:00
Edit :
Quote
@syprus: in what way your media player's been improved?
--
Posted: 2007-03-27 03:11:51
Edit :
Quote
On 2007-02-11 17:05:02, gaurav_c88 wrote:
hey can any one plz plz help me on this one..............
i tried flashing my w550i usind phone xs..........
But when flash it with "PhoneXS 2.10 Alpha 6" start i do evrething but it stop on 3/5
17:10:23| Phone-XS GUI Build V2.10 Alpha Ready!
17:10:23| System Diagnostics check: OK!
17:10:31| Attempting to open the interface...
17:10:31| ++++++++++++++++++++++++++++++++++
17:10:31| Turn off phone
17:10:31| Hold C Button on phone and connect phone.
17:10:31| You have 30 seconds.
17:10:31| ++++++++++++++++++++++++++++++++++
17:10:35| PORT STATUS: ACTIVE
17:10:36| DBID: 8040 (db2010 Marita compact)
17:10:36| proto: 3.1
17:10:36| sending loaders\\db2010_cid00_prodid_p3k.bin
17:10:36| QH00 Header
17:10:36| Wait for EsB
17:10:36| Wait for EhM
17:10:36| QA00 Prologue 6532 bytes
17:10:36| Wait for EaTEbS
17:10:36| QD00 Payload 35540 bytes
17:10:36| Wait for EdQ
17:10:36| This is a PRODUCTION_ID loader
17:10:36| Activating GDFS...
17:10:36| phone name detected
17:10:36| ++++++++++++++++++++++++++++++++++
17:10:36| PHONE INFO
17:10:36| ++++++++++++++++++++++++++++++++++
17:10:36| DBID: db2010
17:10:36| OPT CID: 49
17:10:36| EROM CID: 49
17:10:37| EROM color: red
17:10:37| IMEI: 35744200xxxxxx
17:10:37| Phone: W550
17:10:37| Operator: EMEA_4
17:10:37| CDA: CDA102426/4 R2A
17:10:37| Firmware: R4CB020
17:10:37| EROM: n/a
17:10:37| ++++++++++++++++++++++++++++++++++
17:10:37| ready for operation!
17:13:33| binary sending loaders\\CID49_RED_25.LDR
17:13:33| Header
17:13:33| Prologue 6520 bytes
17:13:33| Payload 40447 bytes
17:13:34| This is a FLASH loader
17:13:34| +++ Now flashing firmware main...
17:13:34| Sending flashfile D:\\w550 update.!!\\far\\Far\\Plugins\\SEFP\\sefp_db2010cid49_4_ alpha_128\\w550_r2e_dcu.49r.ssw
17:13:34| 5 flashblocks
18:01:52| ++ Error: Flashing failed
18:01:52| Disconnected... Unplug the phone
18:02:04| Shutting down...
..i weiting 45 min but nothing.... and i stop it....and my phone is dead now then I start a new flash operation with the same program when click to "start" buton phone conecting program send`s me this mesage:
18:33:52| Phone-XS GUI Build V2.10 Alpha Ready!
18:33:52| System Diagnostics check: OK!
18:33:57| Attempting to open the interface...
18:33:57| ++++++++++++++++++++++++++++++++++
18:33:57| Turn off phone
18:33:57| Hold C Button on phone and connect phone.
18:33:57| You have 30 seconds.
18:33:57| ++++++++++++++++++++++++++++++++++
18:34:03| PORT STATUS: ACTIVE
18:34:03| Got 0x89
18:34:03| Got 0x08
18:34:03| Got 0x2f
18:34:03| Got 0x00
18:34:03| Got 0x30
18:34:03| Got 0x34
18:34:03| Got 0x30
18:34:03| Got 0x33
18:34:03| Got 0x31
18:34:03| Got 0x39
18:34:03| Got 0x20
18:34:03| Got 0x30
18:34:03| Got 0x39
18:34:03| Got 0x32
18:34:04| Got 0x33
18:34:04| Got 0x20
18:34:04| Got 0x4c
18:34:04| Got 0x4c
18:34:04| Got 0x45
18:34:04| Got 0x43
18:34:04| Got 0x58
18:34:04| Got 0x43
18:34:04| Got 0x31
18:34:04| Got 0x33
18:34:04| Got 0x32
18:34:04| Got 0x36
18:34:04| Got 0x37
18:34:04| Got 0x33
18:34:04| Got 0x39
18:34:04| Got 0x5f
18:34:04| Got 0x43
18:34:04| Got 0x4f
18:34:04| Got 0x4d
18:34:04| Got 0x50
18:34:04| Got 0x41
18:34:04| Got 0x43
18:34:04| Got 0x54
18:34:04| Got 0x43
18:34:04| Got 0x45
18:34:04| Got 0x52
18:34:04| Got 0x54
18:34:04| Got 0x4c
18:34:04| Got 0x4f
18:34:04| Got 0x41
18:34:04| Got 0x44
18:34:04| Got 0x45
18:34:04| Got 0x52
18:34:04| Got 0x20
18:34:04| Got 0x52
18:34:04| Got 0x32
18:34:04| Got 0x45
18:34:04| Got 0x8a
18:34:44| Sorry, brown phones are NOT SUPPORTED
18:34:44| +++ Sendinging shutdown signal to phone...
18:34:45| Shutting down...
Now my phone is dead and I can`t turn it on!!! HELP me...
plz reply either here or at
gaurav_c78@yahoo.com
------------------------------------------------------------------------------------------------
SUCCESS----SUCCESS----SUCCESS---SUCCESS
Hai I got the solution for ur problem. U can store the rest file ( rest_w550_R4CB020.bin ) to fix the problem. To store it u can open FAR Manager and go to Flash and copy the rest file. Now exit from FAR manager and unplug cable. Insert sim and turn on ur phone. It will exactly turn on.
--
Posted: 2007-04-19 08:03:16
Edit :
Quote
I've tried to go through all these steps to get rid of my camera sound... only problem is the last step doesn't work...
I was able to access my phone again once, but upon entering FLASH it only said: coming soon...
Now when i try to get back into my phone using FAR i get an error code about CID... failed to read or something like that...
I've gone through the rest of the process exactly the way it's discribed, can anyone help me getting through this final fase?
Would be greatly appreciated!
--
Posted: 2007-04-25 15:34:47
Edit :
Quote
hai i'm new here, but how can i expand my K750i CID 49red sms limit?
when i connect my K750 there is only
Flash
FS
when i browse to one of it, it's empty. is it normal?
--
Posted: 2007-05-14 12:40:37
Edit :
Quote
can this be used on a w810i ?
--
Posted: 2007-05-14 13:18:25
Edit :
Quote
-----------------
SUCCESS----SUCCESS----SUCCESS---SUCCESS
Hai I got the solution for ur problem. U can store the rest file ( rest_w550_R4CB020.bin ) to fix the problem. To store it u can open FAR Manager and go to Flash and copy the rest file. Now exit from FAR manager and unplug cable. Insert sim and turn on ur phone. It will exactly turn on.
Hey, that works but what about trying to flash the FS so i can then customize the phone. No phone xs will complete the flash process of FS
I tried to flash the FS in FAR but got this error:
Plugin Call error
Exception Occured:
"attempt to write to the inaccessible address 0Bx94000"
Exception address 0AE28DD in module
...\\plugins\\SEFO\\sefp.dll
Hmmmm, Im lost. lol -
--
Posted: 2007-05-17 14:26:34
Edit :
Quote
New Topic
Reply
