Sony Ericsson / Sony : Software, Firmware and Drivers : New Modded Camera Driver for K550i
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> New Modded Camera Driver for K550i
Bookmark topic
Hi guys ......
So after a day's wait and problems .... I took my mobile to sony's service centre. .... And as I expected they confirmed that the SOLID LINES in photos were caused by a faulty
"CAMERA MODULE " 
They also confirmed that the damage was a
PERMANANT DAMAGE
Anyway sony will replace my camera module as my set is under warranty
So from today onwards no more clicking ......
Said it may take atleast 3-4 days ........
anyway bad times for me ......
--
Posted: 2007-09-24 11:38:21
Edit :
Quote
kelace maybe your cam module is broken but as you said: sony will repair this so don't worry
Soon you phone will be fix:)
3,4 days are no big problem. Be patient
Good luck!!!
Do you definitely think that number1 modification is the source of your problem? Or maybe this is only unlucky incident
salambama
great photos!!!
Especially the street, photo are really sharp, good work:)
--
Posted: 2007-09-24 11:58:17
Edit :
Quote
wonderful pics
but k550 has the same cam module of k750 or not?
i like these photos.good
--
Posted: 2007-09-24 14:24:16
Edit :
Quote
hi guys
just wanted 2 convey this 2 all in this forum .......
MY CAMERA FAILURE WAS NOT DUE TO THE MODDED DRIVER 
SONY'S SERVICE MEN TOLD THAT IT WAS A VERY RARE CASE AND WAS DUE TO BAD CAMERA MODULE IN MY PHONE
Anyway nothing 2 worry as I would get it replaced 4 free as I have warranty........
--
Posted: 2007-09-24 18:58:31
Edit :
Quote
guys, i have a question here, after i flash in 2.4A cam driver, when i check in service info, it still written tehre cam driver Ver 2.3.. so did i actually get to install new cam driver or still d old one? in XS++ log written i sucessfully install it
--
Posted: 2007-09-25 08:35:41
Edit :
Quote
This is normal, as i didnt changed version number (it is just a detail),
but version is really 2.4
Just record a video in a sunny area, you will see the difference !
[ This Message was edited by: chris067 on 2007-09-25 11:39 ]
--
Posted: 2007-09-25 12:37:54
Edit :
Quote
Would it be possible to create a driver that just briefly flashes the led flash just before the shot is taken? Somewhat like the system most nokia phones seem to use...
It'd be nice if this was enabled in 'twilight portrait mode'... having the bright LEDs shining in your face for 3-4 secs while someone takes a shot just sucks.
I know that the LEDs need to be on for the cam to focus properly but the twilight portrait mode will work fine if the focal length were just fixed at 1.5 meters or so.
And just to confirm:
camdrivers go in ifs/settings/camera
and acoustics go in ifs/settings/acoustic
--
Posted: 2007-09-25 19:10:20
Edit :
Quote
Ok I've uploaded the driver that's supposed to give me 24 fps video and the w880i's acoustics using far, disconnected and the phone's working fine.
My cam driver version still shows up as 2.3 (My phone is R6BC002) and I can't seem to spot any difference in the FPS... Its night here so it might be defaulting to a lower fps but I don't think that thats the case... Is there any way to check if my acoustics and cam driver have indeed been uploaded properly?
--
Posted: 2007-09-25 21:00:43
Edit :
Quote
by night you wont see any change in fps...
high fps needs sun !
showing 2.4 version is just cosmetic, and i didnt changed it
(but i will next time)
[ This Message was edited by: chris067 on 2007-09-25 22:59 ]
--
Posted: 2007-09-25 23:58:04
Edit :
Quote
chris067,number1
So,any news what is going to change with driver,some new thoughts?
--
Posted: 2007-09-26 02:07:53
Edit :
Quote
New Topic
Reply
