News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > J10i2 Elm / J20 Hazel camdriver possibilities Bookmark topic

kronos12: try test it in low light condition with higher EV...see if the yellow-blue line eliminated

you can upload it here too so we all can test it out..
--
Posted: 2010-10-09 01:33:42
Edit : Quote


ok this is day and macro mode
original


andd moded


and this are all moded with exposure at maximum




--
Posted: 2010-10-09 20:16:51
Edit : Quote


somehow the first mod you did seems good. but the next one, I have to admit the original looks better - too much exposure - and the last pic are horrible lots of yellow-blue-green even red line!
--
Posted: 2010-10-10 08:44:24
Edit : Quote


yes l have to say that pictures are now over 1mb and they show little or none difference so...only good thing perhaps is that in normal exposure 0+ or -1 pictures taken inside and pictures of faces and people seams good...l will wait until update for my country come to the air and update the phone...for now current version of firmware is xxxxx64.
--
Posted: 2010-10-10 15:25:39
Edit : Quote




where are u from Kronos ? Here in Malaysia, the update service keep telling me I have the latest version ! (my firmware is still R7CA061) I just hope SE official will take notice the camera issue and solved in the new firmware.
--
Posted: 2010-10-11 02:04:31
Edit : Quote


EU east central europe Balkan area
--
Posted: 2010-10-11 23:00:34
Edit : Quote


ummm so the hazel and elm original cam driver is same?
because mine is hazel and i want to put it back to the original driver
i didn't see any different on the modded cam driver

and my hazel can't hav the newest software update
i wonder if that hav something to do with the modded cam driver

my hazel still R7BA081
i live in indonesia

so what is the newest software?
and where i can update
--
Posted: 2010-10-13 04:55:54
Edit : Quote




the modded cam driver is claimed to have lower compression hence higher picture's bytes. I've tried it but resulting my cam resetting to main menu when pressing the camera button.

I don't think modded camdriver interfere with updating newest firmware cause the fw will just simply overwrite everything and you have to port the modded driver again if preferred.

since you living area are neighboring me, i assume the latest firmware is still unavailable in Asean region, most people updated here are from Europe region. guess we'll have to patiently wait...
--
Posted: 2010-10-13 05:29:25
Edit : Quote





awww what took them so long at asia region (
--
Posted: 2010-10-14 04:22:45
Edit : Quote


I found this here

We found the decision "a pale Camera

From point camera driver (v3.9):

Code:

eq_set_prop_10 =
$ S5% 0
$ C5 00
$ "CAM0_DEBUG: P16 - Auto setting"
# V-Latch_Scene1_Auto_0
# V-Latch_Scene1_Auto_1
# V-Latch_Scene1_Auto_2
$ Cx
$ C5 02
$ "CAM0_DEBUG: P16 - LandScape setting"
# V-Latch_Scene2_LandScape_0
# V-Latch_Scene2_LandScape_1
# V-Latch_Scene2_LandScape_2
$ Cx
$ C5 01
$ "CAM0_DEBUG: P16 - Portrait setting"
# V-Latch_Scene3_Portrait_0
# V-Latch_Scene3_Portrait_1
# V-Latch_Scene3_Portrait_2
$ Cx
$ C5 05
$ "CAM0_DEBUG: P16 - Beach_Snow setting"
# V-Latch_Scene4_Beach_Snow_0
# V-Latch_Scene4_Beach_Snow_1
# V-Latch_Scene4_Beach_Snow_2
$ Cx
$ C5 06
$ "CAM0_DEBUG: P16 - Sports setting"
# V-Latch_Scene5_Sports_0
# V-Latch_Scene5_Sports_1
# V-Latch_Scene5_Sports_2
$ Cx
$ C5 03
$ "CAM0_DEBUG: P16 - Night setting"
# V-Latch_Scene6_TwilightLandScape_0
# V-Latch_Scene6_TwilightLandScape_1
# V-Latch_Scene6_TwilightLandScape_2
$ Cx
$ C5 07
$ "CAM0_DEBUG: P16 - Document setting"
/ / # V-Latch_Scene7_Document_0
/ / # V-Latch_Scene7_Document_1
/ / # V-Latch_Scene7_Document_2
# V-Latch_Scene1_Auto_0
# V-Latch_Scene1_Auto_1
# V-Latch_Scene1_Auto_2
$ Cx
$ C5 04
$ "CAM0_DEBUG: P16 - Night portrait setting"
# V-Latch_Scene8_TwilightPortrait_0
# V-Latch_Scene8_TwilightPortrait_1
# V-Latch_Scene8_TwilightPortrait_2
$ Cx

$ "CAM0: P16 - Scenes% 5"
# SET_REG_8 (01, 00, $ W5) / / (REG: SCENE_SELECT)
$ Mc 5
$ C5 07 / / For Document, the default EV value is 0.7
# SET_REG_8 (00, 80, 02)
# SET_REG_8 (00, 62, 30)
# SET_REG_8 (00, 61, A0)
$ "CAM0_DEBUG: P16 - Change EV to 0.7"
$ Cl / / For else, the default value is 0 EV
$ "CAM0_DEBUG: P16 - Change EV to 0.0"
# SET_REG_8 (00, 80, 00)
# SET_REG_8 (00, 62, 20)
# SET_REG_8 (00, 61, 80)
$ Cx
;


Delete:

Code:

$ "CAM0: P16 - Scenes% 5"
# SET_REG_8 (01, 00, $ W5) / / (REG: SCENE_SELECT)
$ Mc 5
$ C5 07 / / For Document, the default EV value is 0.7
# SET_REG_8 (00, 80, 02)
# SET_REG_8 (00, 62, 30)
# SET_REG_8 (00, 61, A0)
$ "CAM0_DEBUG: P16 - Change EV to 0.7"
$ Cl / / For else, the default value is 0 EV
$ "CAM0_DEBUG: P16 - Change EV to 0.0"
# SET_REG_8 (00, 80, 00)
# SET_REG_8 (00, 62, 20)
# SET_REG_8 (00, 61, 80)
$ Cx


there is little noise in the red, very juicy pics

Here reduce the compression of pictures (500kb -> 1MB):

Code:

# SET_REG_8 (02, 04, 01) / / Set JPEG Compression Quality (REG: JPG_QLTY)
# SET_REG_8 (5A, 02, 06) / / Set JPEG header (REG: JPG_FMT)
# SET_REG_8 (5A, 04, 00) / / Set JPEG header (REG: JPG_FMT)
# SET_REG_8 (00, 14, 01) / / Set output frames Num (REG: CAPNUM)
# SET_REG_16 (03, 54, 05, DC) / / Set JPEG data limit: 1.5M (REG: PRED_UPPER_SIZE_LIMIT1)
/ / # SET_REG_16 (03, 56, 03, 20) / / Set JPEG data limit (REG: PRED_UPPER_SIZE_LIMIT2)


corrected to:

Code:

# SET_REG_8 (02, 04, 02) / / Set JPEG Compression Quality (REG: JPG_QLTY)
# SET_REG_8 (5A, 02, 06) / / Set JPEG header (REG: JPG_FMT)
# SET_REG_8 (5A, 04, 00) / / Set JPEG header (REG: JPG_FMT)
# SET_REG_8 (00, 14, 01) / / Set output frames Num (REG: CAPNUM)
# SET_REG_16 (03, 54, 0F, A0) / / Set JPEG data limit: 1.5M (REG: PRED_UPPER_SIZE_LIMIT1)
/ / # SET_REG_16 (03, 56, 03, 20) / / Set JPEG data limit (REG: PRED_UPPER_SIZE_LIMIT2)

--
Posted: 2010-11-03 05:26:10
Edit : Quote

---

New Topic   Reply

Forum Index