>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
GPRS, WAP, MMS and Email setup
> T-Mobile USA and CSD
Bookmark topic
I was finally able to get in touch with T-Mobile's Tier 3 Support staff. According to the tech guy, the settings for the P800 (which he claims he's familiar with) was this:
Under Internet Accounts:
1) Create a new account (I called mine T-Mobile CSD)
2) Set Connection Type to Dial-up
3) Leave Username and Password alone
4) Use 19132440821 for the phone number (don't use +1 he says)
5) Click on Advanced
6) Everything all the settings alone...make sure Get IP and DNS address is set to automatic, set Speed/Connection Type set to ISDN and make sure Enable High Speed is unchecked (according to the rep, T-Mobile doesn't support HSCSD)
Under WAP Accounts:
1) Create a new account (I called mine T-Mobile CSD also)
2) Set your Internet Account to the CSD account
3) Check Use Proxy
4) Use IP address 010.168.200.050
5) Set Port to 9201
6) Don't put anything in Username and Password (however, according to the rep, put the letter a in username and password if you have problems).
I tried these setting and I got a "Call was not answered". The rep told me that they have an unconfirmed outage in my area (Chicago). He told me to try for a few days and if it doesn't work, call [Edit phone number removed by laffen]. I'm assuming that number is for their Tier 3 support.
Try these settings and see if they work in your area.
Cheers,
Ron
_________________
Ron
Current phones: P800(R2D), T68i(R7A013)
Current PDAs: iPAQ 5455, Clarion AutoPC 310
Previous phones: T68ie, Sanyo 4500, Nokia 6160
Previous PDAs: iPAQ 3975, Casio E-200,E-125,E-115,E-100,E-10,A-10 HPC, Everex A-15, Palm III
[ This Message was edited by: laffen on 2004-11-05 11:01 ]
--
Posted: 2003-04-03 00:32:00
Edit :
Quote
@ Starhawk
Does this number work only in chicago area? can you give me the dial-up number here in San Francisco. because I tried your settings but all I get again is " call is not answered" Thanks.
[ This Message was edited by: cdcjr on 2003-04-02 23:52 ]
--
Posted: 2003-04-03 00:40:00
Edit :
Quote
@cdcjr rather than sitting around wonder, pick up the phone and try it. Yes Toll-free numbers can be set to exclude areas but most aren't set that way.
--
Posted: 2003-04-03 02:25:00
Edit :
Quote
@ krazykritter
I've tried it a lot of times ( Sorry, I may sound like a broken record ) but all I get is call not answered
--
Posted: 2003-04-03 19:32:00
Edit :
Quote
@cdcjr No I meant try calling Tier 3 support...
--
Posted: 2003-04-03 22:21:00
Edit :
Quote
@ cdcjr My settings are a little different from krazykritter's
In data accounts I set up a csd account with the same phone # (9132440821)
everything else blank until Data rate: 9.6
dial type: ISDN
In Wap services (Or T-Zones icon)
options wap profiles: add a profile called GSM (or whatever you want)
connect using csd (or whatever you named your data account).
IP address: 216.155.165.50
then select profile GSM (or whatever you called your WAP profile).
Works for me. Should be the same anywhere in USA unless the phone # -- which is a mobile 2 mobile # on T-Mobile -- doesn't work with your cingular-shared network.
--
Posted: 2003-04-24 18:42:00
Edit :
Quote
New Topic
Reply
