News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Symbian phones > P900 cable connection trouble, tried everything. Bookmark topic


check in ur device manager if SEMC DSS-20 Syncstation cable is enabled and working.
ill also check out other options, other than that, did u follow my msg exactly step by step, just keep in mind that u have to disable the com port the fone is connected before trying to connect. pls let me know.
--
Posted: 2004-02-28 10:59:44
Edit : Quote


thanks again.
checked SEMC DSS-20 Syncstation cable - working.
followed it step by step exactly.
Disabled com port in phone monitor options.

I also have my DSL modem connected through USB 1, and have the phone connected to USB 2, which is recognised as com 3 after installation. is that a problem?

I have disconnected the DSL modem and tried it alone without any luck.
--
Posted: 2004-02-28 11:35:07
Edit : Quote


please tell me which com port ur usb1 is using, if at all its usin a com port, coz as i told u earlier, com1 and com3 are one and the same, and one more important thing, apart from disconnecting the dsl modem physically, also remove it from the modems in control panel, fcourse if only you would be able to install it again later,

there are times when some modems which work through the usb port dont work when there are other modems connected.
--
Posted: 2004-02-28 11:51:23
Edit : Quote


I tried removing the other modem and starting it all again without any success. The phone connection link recognises the phone when i connect it to the cradle, and moves the arrows, however the computer connot for some reason connect to the phone for dial up connection at all. from the wizard and from manual installation.

I'm sure i'm not the only person with this problem, and if anybody has anything more to offer please dont hesitate to say so.


--
Posted: 2004-02-29 01:40:12
Edit : Quote


guess i bought a dodgy phone...
--
Posted: 2004-03-01 11:01:41
Edit : Quote


Tried new USB drivers?

http://www.sonyericsson.com/s[....]leCatID=5&MN=Drivers&noredir=1
--
Posted: 2004-03-01 11:06:31
Edit : Quote


unfortunately, ive already downloaded the new drivers for both the sync station and modem without any luck at all.
its really shattering...
--
Posted: 2004-03-01 12:10:43
Edit : Quote


[quote]
On 2004-02-29 01:40:12, Closecat wrote:
I tried removing the other modem and starting it all again without any success. The phone connection link recognises the phone when i connect it to the cradle, and moves the arrows, however the computer connot for some reason connect to the phone for dial up connection at all. from the wizard and from manual installation.

@Closecat
Buddy, before trying to connect to the net, you please double click on the phone connection link and uncheck the com3 so that it shows "NOT CONNECTED", the go to control panel on ur phone and choose cable and choose modem and then try connecting please, i guess i explained the same thing in my first post to u.

then please also go to control panel of your computer and then choose the phone monitor options and enable ur com port 3.
pls get back to me.

_________________
Begin at the beginning and end at the end.

[ This Message was edited by: georgejason on 2004-03-02 08:15 ]
--
Posted: 2004-03-02 08:50:23
Edit : Quote


I had serious issues with the cradle and could not get it to work at all and the only solution that wirked for me was a wipe of my harddrive and a new installation of win 2000
--
Posted: 2004-03-02 13:59:25
Edit : Quote


http://www.esato.com/board/viewtopic.php?topic=47266#post627244

Check this link, its about disabling the modem to free up the virtual ports.

Hope this helps.
--
Posted: 2004-03-02 15:15:12
Edit : Quote

---

New Topic   Reply

Forum Index