Esato Mobile
Sony Ericsson / Sony : Software, Firmware and Drivers : R2AE033 is out (in Service Centers, not Update Service)
> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > R2AE033 is out (in Service Centers, not Update Service) Bookmark topic
Page <  123, 4 ... 171819>

govigov Posts: > 500

i went and checked. he said the r2l is still the latest. he said he got no official mail from sonyericsson. when will he get such a mail?? and it seems it takes about 6 hours to downlod the software. how big is the download??? he is using dial up.
--
Posted: 2004-12-09 08:24:33
Edit : Quote

DarkJedi664 Posts: 9

well i just updated to R2AA and my camera version is 3.9. so i don't know.
--
Posted: 2004-12-09 09:14:08
Edit : Quote

CyberVisitor Posts: > 500

I'm sure that when the update is available at service centres and they provide the update for you (or Sony Ericsson Update Service), then the camera software is updated as well.

The software available at this non authorized update server is not official software and therefore they don't have the camera software in it. The version they have is probably a cut down version that Sony Ericsson used during their testing on phones that didn't need the camera software to be updated. The version they got hold of simply lacks the software for the camera.

I have no idea why people keep playing around with software from these servers... even less, how can some one be so desperate for an update that he installs a software that was known to disable the camera? This "hunt" for new software has gone to far!
--
Posted: 2004-12-09 14:29:45
Edit : Quote

vee Posts: 435

Cyber,

I totally agree with you and also think that people should use only authorized Service Centers when they can or have warranty, but in some cases it is usefull to have other options (once again my suggestion is SE Service Center 1st)... But the files you put in your phone are official EMMA2 files and not some ones used for testing... they are the same files that will be used in SE Service Center.

For anyone that have problems with Camera Software version I must tell you that this is Total Server problem, because I tested other 2 unofficial solutions and they worked no problem with Camera Software version 3.9... Hope this helps to anyone

vee
--
Posted: 2004-12-09 15:26:39
Edit : Quote

ares Posts: > 500

Hereīs my latest story:

I went to a Service Center to upgrade to r2aa. They did, although they recomended r2l instead

Some days after, i realised what was the problem with r2aa - i couldnīt sync with outlook anymore!

So, as soon as i could, i returned to the Service Center to ask them to put r2l instead. They did it, and i was able to sync with outlook again

But...soon i realized the camera stoped working!!!! I made a master reset and it didnīt work. I returned to the SC for a reflash, but it still didnīt work...i wonder what was the problem??? Maybe it was that camera software you people are talking about...

Well, now iīm stuck with a blokia 6210 for a week and waiting for getting my k700 back from a upper level Service Center were it was sent to...

I hope itīll bring r2ae when it comes back
--
Posted: 2004-12-09 15:27:29
Edit : Quote

feco Posts: 245

How can I flash my K700 with R2AA003 with Camera 3.09 to R2AE003 with camera 3.10 firmware? If Im going to loose the camera function how can I upgrade it?
--
Posted: 2004-12-09 15:39:46
Edit : Quote

wsx Posts: 9

There is still R2L on SEUS.

I tried it a moment ago.


################################################################
# #
# Thu Nov 25 00:05:04 CST 2004 #
# #
# System information: OS: Windows XP #
# ver: 5.1 #
# arch: x86 #
# #
# Java env information: JRE: 1.4.1_02 #
# JVM: 1.4.1_02-b06 #
# #
################################################################

****************************************************************
* Application started: 2004-11-25, 00:05:04. *
* *
* Application version: 1.26. *
* Install package version: 1.15. *
* Upgrade package version: 1.00. *
****************************************************************

00.05.21:687 2 Info Device IMEI number: 354011000005123 (by) homeflash.id
00.05.23:000 3 Info Device IMEI number: 354011000005123 (by) homeflash.id
00.05.24:546 4 Info Battery: +CBC: 0,90 (by) homeflash.id
00.05.25:000 5 Info Turn Off: (by) homeflash.id
00.05.28:234 6 Info Rev: R2L001 R2L001 prgCXC125881_CHINA_C (by) homeflash.td
00.05.28:234 7 Info CDA: CDA102298/38 (by) homeflash.td
00.05.32:156 8 Info ScriptVersion = R2AA003 R2AA003 prgCXC125881_CHINA_C (by) homeflash.id
00.05.32:156 9 Info DeviceVersion = R2L001 R2L001 prgCXC125881_CHINA_C (by) homeflash.id
00.05.32:156 10 Info Battery level ok (by) homeflash.td
00.05.33:312 11 Info Searching: HL1_pg_K700CDA102298/38CID29RED_f_041015_0705_3 (by) homeflash.id
00.05.34:250 12 Warning Signature invalid! File will be deleted (by) homeflash.id
00.05.34:265 13 Warning Signature invalid! File will be deleted (by) homeflash.id
00.08.06:234 14 Info File signature is ok, file downloaded successfully. (by) com.sonyericsson.homeflash.t
00.08.20:406 15 Info File signature is ok, file downloaded successfully. (by) com.sonyericsson.homeflash.t
00.08.20:578 16 Info Searching: HL1_pg_K700CDA102298/38CID29RED_f_041015_0705_3 (by) homeflash.id
00.08.21:375 17 Info ###### Script started, HL1_pg_K700CDA102298/38CID29RED_f_041015_0705_3 (by) homeflash.msconnector.ic
--
Posted: 2004-12-09 15:45:16
Edit : Quote

CyberVisitor Posts: > 500

@vee

The files at the Multi Server who currently provides the R2AE033 firmware is not official and not complete since they cannot make the camera work for phones with camera version 3.9. My source says that the official release don't have this problem. I couldn't get any information however if the official software updates the camera version to 3.10 or if the firmare works with 3.9. The important matter is that the new firmware will work for everybody if updated officially!

If the version they have is complete, my source said that Sony Ericssons developers might have found a workaround to [try] stop unofficial update servers from being able to update phones [at least for a short period until these servers find a new way...]

[ This Message was edited by: CyberVisitor on 2004-12-09 15:17 ]
--
Posted: 2004-12-09 15:51:57
Edit : Quote

vee Posts: 435

Cyber,

Yes I can confirm that files on Total Server are having this problem so don't use Total Server to update your phone to R2AE...

But I can also confirm that I have tried 2 other solutions and that they don't have that problem... updating to R2AE will also update your camera software to 3.10.

BUT I WOULD REALLY SUGGEST that you people wait for a few days that software comes out to SE Service Centers or if you still want to use unofficial solutions (at your own risk of loosing warranty) contact with solution providers first.

take care,

vee
--
Posted: 2004-12-09 15:59:58
Edit : Quote

CyberVisitor Posts: > 500

@Arez

No, you just suffered from a corrupted firmware when they updated/downgraded the phone. This happens often with Sony Ericsson Online Update Service, but sometimes it happens at service centers too (not often though). Read this link and the link I'm refering to there: http://www.esato.com/board/viewtopic.php?topic=76752#post1026206

By the way, there is a problem with the Sony Ericsson Online Update Service. It often corrupts the firmware while performing the update. I doubt the new firmware will be on the Online Update Service very soon since Sony Ericsson still haven't been able to fix that problem (and they don't want another flood of phones returned due to corrupted firmware, since they had that when R2L001 was released at the Online Update Service).

Those who want the new R2AE033 will probably have to either wait, or update your phone at a local service center.

[ This Message was edited by: CyberVisitor on 2004-12-09 15:04 ]
--
Posted: 2004-12-09 16:00:54
Edit : Quote
Page <  123, 4 ... 171819>

New Topic   Reply
Forum Index

Esato home