>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Symbian phones
> P900 Facia on P800?
Bookmark topic
lighten up boing.
roll a spiff.
--
Posted: 2004-06-18 15:44:37
Edit :
Quote
Impossible. Cant be done. Not a chance. Who ever said they have seen it done, well sorry but that is wrong. It is totaly impossible.
Im the type of person that will say nothing is impossible but really this is!
--
Posted: 2004-06-19 20:05:17
Edit :
Quote
but we're still waiting, at least to see how the P8900 will look like!
--
Posted: 2004-06-20 12:42:45
Edit :
Quote
I took a few photos and I will post them when I write about it. I have a few probs with my OS and internet, once sortted you will see it.
--
Posted: 2004-06-20 22:12:20
Edit :
Quote
so does that mean it has worked? or will we have to wait and find out?
--
Posted: 2004-06-20 22:58:05
Edit :
Quote
yeah... at least a simple YES or NO would be fine.
can't wait for the pics too!
--
Posted: 2004-06-21 14:45:38
Edit :
Quote
Kem2000
WROTE:
so does that mean it has worked? or will we have to wait and find out?
hAnDyGUY
WROTE:
yeah... at least a simple YES or NO would be fine.
can't wait for the pics too!
So what part of this did you not understand!
P800_Zen_master
WROTE:
Impossible. Cant be done. Not a chance. Who ever said they have seen it done, well sorry but that is wrong. It is totaly impossible.
Look 4 post up.
How it turned out!
First pic shows the P800 in two parts!
This pic shows the frame part of the back part. Jog dial and headphone jack goes perfectly into place but the Speaker and the two buttons didnt fit, but got them to fit! with a little melting find out later down the track! Also the Speaker on the P900 is a lot smaller! as you can see from the Frame!
This pic shows the the speaker for the ear is perfect fit!
OK big problem here, the P900 screen is a lot smaller, A lot smaller! for me to get it to fit I had to get my solder iorn out and melt about 2-3mm on each side! then about 8mm from the bottom! big difference in size!
Here is a pic of the screen fitting perfectly into the frame! so my melting job actully worked!! the red lines are around the parts I had to remove in order to make it fit!
This pic you see the parts I melted away to fit the main borad! The lower red line is a part of the speaker that I had to remove to make the speaker fit! which also worked!!
This pic is the bottom corner that hard to be removed to fit the main borad in.
this is the other corner, it had to be removed also!
This pic shows that I got the main board to fit in the back part! However the P800 main board is a little longer! so I had to sand down the top of the board in order for it to fit!
So......... Screens in, main board is in, all I need to do now is connect the two!
This pic shows they cant be connected! The P800 screen must be a lot fatter then the P900 screen! So! I cant really do anymore! The screen is just two fat! So its impossible!
[ This Message was edited by: P800_Zen_master on 2004-06-22 14:45 ]
--
Posted: 2004-06-22 15:42:04
Edit :
Quote
Well if you buy a P900 screen it will probobly fit
But good work anyway, you did your best.
--
Posted: 2004-06-22 20:03:31
Edit :
Quote
oh well....pity but great work... at least we actually now know for sure that it cant be done!
--
Posted: 2004-06-22 21:58:49
Edit :
Quote
Very very well done. We are impressed by your persistence.
--
Posted: 2004-06-25 04:58:41
Edit :
Quote
New Topic
Reply
